How to connect two different networks using Cisco Packet Tracer 1. First you need to deploy at least two end devices to a separate switch. 2. Second you must then assign an IP address to each end device 3. Computer 1 Network 1 IP: 192.168.10.2 4. Computer 2 Network 1 IP: 192.168.10.3 5. Computer 1 Network 2 IP: 192.168.20.2 6. Computer 2 Network 2 IP: 192.168.20.3 7. Then add in a Router for each network, connecting it to the switch 8. Then set the IP address in the router as such: 9. Router 1 IP to the Switch 1: 192.168.10.1 10. Router 1 IP to Router 2: 192.168.30.1 11. Router 2 IP to Switch 2: 192.168.20.1 12. Router 2 IP to Router 1: 192.168.30.2 13. Then set the default gateway on every device to the same as the Router IP to Switch 14. Then go into Router 1 and create a static route to the other network, set the network to 192.168.20.0 then set the mask to 255.255.255.0 after that set the next hop to the Router 2 IP (192.168.30.2). This will give router 1 the information needed to ...
IP Address and Classes Different IP classes A - 255.0.0.0 B - 255.255.0.0 C - 255.255.255.0 D - 255.255.255.255 Public IP: Can be anything 32bit character. It is used to identify a network Private IP: Based on the networks subnet mask it is used to identify devices on a network Packet tracer A packet tracer is used to simulate a network and test if the connection will work. It can be used by business to check if there systems will work before they make any financial decisions.
AMD Ryzen Threadripper CPU's are significantly more powerful then there Ryzen counterparts. They have more CPU cores which makes them great for servers and large applications. However they are extremely expensive and are not recommended for common applications. Normal consumer grade Ryzen CPU's. Phones use ARM cpu's mainly made by Qualcomm
Comments
Post a Comment